Monday Kids Micro SD Storage Board TF Card Module Slot Socket Memory Shield Module SPI for Arduino Micro SD Card Reader Module
Payment Security
We are PayPal Verified
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at mondaykids.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
- Brand Name: Monday Kids
- Condition: New
- Type: Logic ICs
- Operating Temperature: -20 ~ 60 Celsius
- Dissipation Power: none
- is_customized: Yes
- Model Number: Micro SD Storage Board
- Supply Voltage: 4.5-5.5V
- Application: Electronic Circuit
- Power Supply: 4.5-5.5V
- Current: 0.2-200mA
- Interface Level: 3.3 or 5V
- Cards Supported: Micro SD card(<=2G), Mirco SDHC card(<=32G)
- Size: 42X24X12mm
Description
The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read.
Module features are as follows:
1.It supports Micro SD card,Micro SDHC card
2.Board level conversion circuit, namely, interface level for 5 V or 3.3 V
3.Power supply:4.5V~5.5V,the onboard 3.3 V voltage regulator circuit
4.Communication interface is a standard SPI interface
5.4 M2 screw positioning hole, easy to install
Interface parameters:
Project Minimum Typical projects Maximum Unit
VCC 4.5 5 5.5 V
Current 0.2 80 200 mA
Interface level 3.3 or 5 V
Support Card Type Micro SD card (<= 2G), Mirco SDHC card (<= 32G)
Size 42X24X12 mm
Weight 5 g
Control interface
1.Six pins (GND, VCC, MMonday KidsO, MOSI, SCK, CS) GND is grounding wire,VCC is power supply, MMonday KidsO, MOSI, SCK are bus of SPI, CS for foot piece of selected signal.
2.The output voltage of 3.3 V for level conversion chip, Micro SD card
3.The Micro SD card direction of signal is converted into 3.3 V, MicroSD card to control interface of MMonday KidsO signal is transformed into 3.3 V, general AVR single chip microcomputer system can read the signal;
4.Micro SD is the booth, persons possessing plug
Interface as shown Mirco SD card module is shown below:
- Unit Type: piece
- Package Weight: 0.03kg (0.07lb.)
- Package Size: 15cm x 12cm x 10cm (5.91in x 4.72in x 3.94in)
View More Products From Below Categories:
