ST-LINK/V2 STM8 & STM32 emulator downloader and programmer

A USB programmer and emulator for ST’s range of STM8 and STM32 microcontrollers. The programmer will work with any software that is compatible with the ST-Link V2 programmer including ST's own tool set (IAR, STVD etc). This programmer is also ideal for use with our own ranger of STM8 development/breakout boards.

Features:

1、Support all series of STM32 SWD interface debugging, simple interface, fast speed, stable work;

2、Support the full range of STM8 download debugging (commonly used development environments such as IAR, STVD, etc. are supported); supported software versions are as follows:

• a.ST-LINK Utility 2.0 and above 
• b.STVD 4.2.1 and above
• c.STVP 3.2.3 and above 
• d.IAR EWARM V6.20 and above 
• e.IAR EWSTM V6.20 and above
• f.IAR EWSTM8 V1.30 and above 
• g.KEIL RVMDK V4.21 and above

3、Support automatic firmware upgrade to ensure the follow-up support of ST products. Factory firmware has been upgraded to the latest V2.J17.S4;

4, increase the electrostatic protection circuit, the output I / O ports are protected, not afraid of static electricity;

5, the product size is only 58mm X 19mm x 11mm compact, easy to carry, does not take up space, heat-shrink tubing protection, feel good, anti-short-circuit, dustproof

ST-LINK/V1 and ST-LINK/V2 two driver mode is completely different, if you have been using V1, change to V2, you need to reinstall the ST-LINK/V2 driver, and may need to update the software.In other words, ST-LINK/V1 and V2 are completely different devices for your computer.

VISTA, WIN7, WIN8 users, please use the administrator mode to install the driver and application, such as dynamic signature problems, please be sure to trust the ST LINK V2 driver (WIN8 may need to disable the driver to force the signature to install successfully).

After the installation is complete, the device “STMicroelectronics STLink dongle” will appear in the device manager.