USBASP USBISP AVR programmer + Adaptor for ATMEGA8 ATMEGA128 ATtiny CAN PWM 3.3V 5V with 10Pin Cable

This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware. For those interested, the firmware source code can be downloaded from the USBasp website.

Additionally we have reprogrammed the firmware to allow it to be directly compatible with the Arduino IDE (simply select Tools->Programmer->USBasp) - the standard firmware is NOT compatible with the latest versions of the Arduino IDE.

Features:
Compatible with most types of Atmel AVR microcontrollers (see list)
Standard 10 pin ICSP header
Included ICSP cable for solderless connection to your development board
Included 10 to 6 pin adapter
Configurable 5V and 3V power supply
LED power and programming indicators
Compatible with AVRDude and Arduino IDE

Supported devices:

    Mega Series

    ATmega8 ATmega48 ATmega88 ATmega168 ATmega328

    ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16

    ATmega161 ATmega162 ATmega163 ATmega164 ATmega169

    ATmega2560 ATmega2561 ATmega32 ATmega324 ATmega329

    ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649

    ATmega6490 ATmega8515 ATmega8535

    Tiny Series

    ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26

    ATtiny45 ATtiny85 ATtiny2313

    Classic Series

    AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414

    AT90S4433 AT90S4434 AT90S8515

    AT90S8535 

    CAN Series

    AT90CAN128 

    PWM Series

AT90PWM2 AT90PWM3

10 pins:
1)..............MOSI
2)..............VCC (5V/3.3V via JP1)
3)..............GND
4)..............TXD
5)..............RESET
6)..............RXD
7)..............SCK
8)..............GND
9)..............MISO
10)............GND